Featured

Pall Rentals and Services

Pall particulate filter and coalescer rental skids can be deployed quickly and without CAPEX burden, to purify and remove water from both process fluids and final products

Pall Rentals and Services – Fast, Flexible and CAPEX free

Take back control of contamination on critical process assets without delay and with the full support of local experts, to safeguard output, to improve final product quality, and without the CAPEX burden of purchase

 

Our services include:

 

  • Contamination mapping & monitoring
  • Emergency, short-term or semi-permanent supply of filtration equipment for fluid depollution
  • Pilot scale demonstration of technologies before full application
  • Filter maintenance and equipment upgrades
  • Metallic filter elements cleaning

Our rental equipment fleet includes:

 

  • High Flow Particulate Filtration Skids - Flows up to 2158 m3h (325,760 bbl/day)
  • Liquid/Liquid Coalescer Filter Skids - Flows up to 672 m3h (101,000 bbl/day)
  • Mobile Fluid Dehydration Purifiers
  • Varnish Removal Systems
  • Diagnostic and Monitoring Equipment

 

Our High Flow Filtration Systems are proven to efficiently and reliably remove solid contaminants from a wide range of process and product streams, whilst our Liquid/Liquid coalescers are effective at removing water from final products including gasoline, diesel, jet, and LPG and separating water from refinery intermediates.

 

Together these technologies help prevent fouling and minimize downtime while improving final product quality. Both can be installed quickly for emergency upsets or used to reach longer-term product quality improvements or schedules for use in short or long-term rental requirements when CAPEX restrictions may prevent purchase.

Ready to speak to an expert? Contact us below to find out how our rentals and services can help.

Pall Modular Rental Skids

WATCH OUR VIDEOS to discover how to service rental equipment when we cannot be present and appreciate how simple the process is.

CASE STUDY: Pall Rental Services in Action!

  • Challenge
    High amine and anti-foam consumption, Amines TSS at 230 mg/l, AC filter by-passed due to fouling Target: To meet particulate specifications for final products and increase production rates
  • Solution
    Mobile filter skid installed on lean amine side, running slipstream 15µm > 10µm >4.5µm filtration @ 60 m3h using absolute rated Ultipleat® High Flow cartridges
  • Results
    Amine TSS reduced below 10 mg/l after 3 weeks of filtration, foaming eliminated Return of the AGRU back to full production capacity Economical Benefits: Cost avoidance > $1M

  • Americas

  • Middle East

  • Europe

  • Asia Pacific

  • Applications

North American Filter Rental/Coalescer Fleet

 

Filter Rental Services - Fast, Flexible and CAPEX Free

 

Pall’s North American Rental fleet consists of four distinct skid types. Typical applications include:

 

  • Protection of hydrotreater or hydrocracker bed and heat exchanger
  • Removal of particles and water from refinery fuels, including steam stripped diesel
  • Filtration and coalescing of rich or lean amine
  • Removal of particles and hydrocarbon from sour water
  • Removal of caustic from hydrocarbon
  • Removal of water/brine from hydrocarbon condensate

 

Middle East Filter Rental/Coalescer Fleet

 

Rental Filter Services - Fast, Flexible and CAPEX Free

 

Pall’s Middle East and Africa Rental fleet consists of two distinct skid types. Typical particle removal applications include:

 

  • Feed stocks to protect catalytic reactor beds
  • LPG, gasoline, diesel, and jet fuel final products
  • Many other contaminated products that can be
  • found in a variety of storage tanks in a plant
  • Amine (rich and lean)
  • Aromatic extraction solvents
  • Dehydration solvents
  • Sour water
  • Make-up water
  • Pre-filtration for liquid/liquid separations

 

 

Propelling service and support to the highest level

 

In addition to Rental Services, Pall can provide Annual Service Plans for your Pall Oil Purifier and Cleanliness Cabinet assets. Available in different levels of support depending on your need or severity of equipment use, our service plans provide the assistance you need to protect your investment and optimize your workflow productivity. The plans also represent cost savings when compared to purchasing repair, calibration or maintenance services individually. For more information, download the PDF’s below or contact one of our experts for advice.

European Filter Rental/Coalescer Fleet

 

Filter Rental Services - Fast, Flexible and CAPEX Free

 

Pall’s European Rental fleet also consists of two distinct skid types. Typical particle removal applications include:

 

  • Feed stocks to protect catalytic reactor beds
  • LPG, gasoline, diesel, and jet fuel final products
  • Many other contaminated products that can be
  • found in a variety of storage tanks in a plant
  • Amine (rich and lean)
  • Aromatic extraction solvents
  • Dehydration solvents
  • Sour water
  • Make-up water
  • Pre-filtration for liquid/liquid separations

 

 

Propelling service and support to the highest level

 

In addition to Rental Services, Pall can provide Annual Service Plans for your Pall Oil Purifier and Cleanliness Cabinet assets. Available in different levels of support depending on your need or severity of equipment use, our service plans provide the assistance you need to protect your investment and optimize your workflow productivity. The plans also represent cost savings when compared to purchasing repair, calibration or maintenance services individually. For more information, download the PDF’s below or contact one of our experts for advice.

Asian Filter Rental  Fleet

 

Pall’s Asian Rental fleet consists of one skid type. Typical particle removal applications include:

 

  • Feed stocks to protect catalytic reactor beds
  • LPG, gasoline, diesel, and jet fuel final products
  • Many other contaminated products that can be
  • found in a variety of storage tanks in a plant
  • Amine (rich and lean)
  • Aromatic extraction solvents
  • Dehydration solvents
  • Sour water
  • Make-up water
  • Pre-filtration for liquid/liquid separations

Click the PDF below for detailed information regarding the Asian Rental Fleet skid.

 

 

Oil and gas refining process rely on the purity of feed streams for efficient process reactions. Removal of fluid and particulate contaminants from feed streams and fluid re circulation processes is essential for improving refining efficiency.

Hazy Product

 

 

Final refinery products are usually filtered and coalesced to remove solid contaminants and suspended water prior to leaving the refinery premises for final delivery. Contaminants, such as rust and pipe scale can foul and erode distribution equipment (e.g. pumps, nozzles, flow meters) as well as end users’ equipment (e.g. engines, boilers). Water in fuels can also cause corrosion leading to major problems within the engine injection system or the engine itself.

 

Hydroprocessing – Catalyst Bed or Exchanger Fouling

 

Hydrotreating is a catalytic chemical process to remove Sulfur (S), Nitrogen (N), Oxygen (O), and metals from straight run and cracked products. This “clean-up” also saturates olefins to yield easier-to-process intermediates. Removing the S reduces SOx emissions when fuels are combusted. Sulfur also poisons downstream reformer catalysts and must be removed from the feeds to improve catalyst bed activity and prevent costly shutdowns.

 

Acid Gas Removal – Amine Foaming

 

Acid gas removal processes utilize amines or specialty solvents to remove acid gases such as H2S and/or CO2 from Refinery Fuel Gas (RFG) in order to meet the gas quality specifications. The sour gas is contacted with lean amine in the contactor tower. An acid-base reaction occurs, binding the acid gases to the amine with a weak bond. The rich amine then flows to a regenerator, where heat breaks the weak bond between the amine and the acid gas, releasing the acid gas and regenerating the amine for re-use. The acid gases exit the top of the regenerator for further treatment while the lean amine is recirculated back to the contactor in a recirculating loop. Acid gases must be properly treated to achieve oil production quotas and avoid operation bottlenecks.

 

Caustic Carryover/High Sodium

 

Caustic treating is used to upgrade a wide range of liquid fractions from LPG to diesel fuels and heating oils. As the caustic solution (and often a catalyst) mixes with the hydrocarbon feed it either extracts or sweetens mercaptans, depending on the process used. However, the combination of the hydrocarbon and mercaptan-rich caustic also forms a very stable emulsion that is difficult to separate, causing significant quantities of caustic carryover in the product. If the caustic emulsion is not separated from the hydrocarbon stream the results is off-spec product.