PRO Services Rental Fleet - Fast, Flexible and CAPEX Free
Locally available mobile equipment fleet for short or long-term rentals to control contamination on critical process assets, safeguard output, and improve end product quality.
- Emergencies
- Process Optimization
- Increased Capacity
- Turnarounds & Clean-ups
Select a Region
The skid rental equipment fleet includes:
- High Flow Particulate Filtration Systems for flows up to 2158 m3h (325,760 bbl/day)
- Liquid/Liquid Coalescer filters for flows up to 672 m3h (101.000 bbl/day)
- Mobile Dehydration Purifiers
- Varnish’ removal systems
- Diagnostic and monitoring equipment
Our High Flow Particulate Filtration Systems are proven to efficiently and reliably remove contaminants from a wide range of process and product streams.
Our Liquid/Liquid coalescers are efficient at removing water from final products including gasoline, diesel, jet, and LPG and separating water from refinery intermediates. Together these technologies help prevent fouling and minimize downtime while improving final product quality.
Both can be installed quickly for emergency upsets or used to reach longer-term product quality improvements or schedules for use in short or long-term rental requirements when CAPEX restrictions may prevent purchase.
WATCH OUR VIDEOS to discover how to service rental equipment when we cannot be present and appreciate how simple the process is.
Changing a particulate filter
Changing a Coalescer filter
CASE STUDY: PRO Services in Action!
-
ChallengeHigh amine and anti-foam consumption, Amines TSS at 230 mg/l, AC filter by-passed due to fouling Target: To meet particulate specifications for final products and increase production rates
-
SoutionMobile filter skid installed on lean amine side, running slipstream 15µm > 10µm >4.5µm filtration @ 60 m3h using absolute rated Ultipleat® High Flow cartridges
-
ResultsAmine TSS reduced below 10 mg/l after 3 weeks of filtration, foaming eliminated Return of the AGRU back to full production capacity Economical Benefits: Cost avoidance > $1M
Interested in learning more? Complete the form below. One of our representatives will contact you.
Thank you for filling out the form! One of our associates will contact you shortly!
Pall’s North American Rental fleet consists of four distinct skid types. Typical applications include:
- Protection of hydrotreater or hydrocracker bed and heat exchanger
- Removal of particles and water from refinery fuels, including steam stripped diesel
- Filtration and coalescing of rich or lean amine
- Removal of particles and hydrocarbon from sour water
- Removal of caustic from hydrocarbon
- Removal of water/brine from hydrocarbon condensate
Click the pdfs below for detailed information relating to each skid.
7-Around Duplex High Flow Filter Rental Skid
19-Around Simplex High Flow Filter Rental Skid
19-Around Simplex High Flow Filter Rental Skid*
37-Around Liquid/Liquid Coalescer Rental Skid
Pall’s Middle East and Africa Rental fleet consists of two distinct skid types. Typical particle removal applications include:
- Feed stocks to protect catalytic reactor beds
- LPG, gasoline, diesel, and jet fuel final products
- Many other contaminated products that can be
- found in a variety of storage tanks in a plant
- Amine (rich and lean)
- Aromatic extraction solvents
- Dehydration solvents
- Sour water
- Make-up water
- Pre-filtration for liquid/liquid separations
High Flow Rental Simplex Skid up to 200 m3/h (30,000 bbl/day)
Liquid/Liquid Coalescer Rental Skid up to 672 m3/h (101.000 bbl/day)
High Flow Rental Simplex Skid up to 2158 m3/h (325,760 bbl/day)
Pall’s European Rental fleet also consists of two distinct skid types. Typical particle removal applications include:
- Feed stocks to protect catalytic reactor beds
- LPG, gasoline, diesel, and jet fuel final products
- Many other contaminated products that can be
- found in a variety of storage tanks in a plant
- Amine (rich and lean)
- Aromatic extraction solvents
- Dehydration solvents
- Sour water
- Make-up water
- Pre-filtration for liquid/liquid separations
Click the pdfs below for detailed information relating to each skid.
Pall’s European Rental fleet also consists of two distinct skid types. Typical particle removal applications include:
- Feed stocks to protect catalytic reactor beds
- LPG, gasoline, diesel, and jet fuel final products
- Many other contaminated products that can be
found in a variety of storage tanks in a plant - Amine (rich and lean)
- Aromatic extraction solvents
- Dehydration solvents
- Sour water
- Make-up water
- Pre-filtration for liquid/liquid separations
Click the pdfs below for detailed information relating to each skid.
Simplex 4 Element Filter Skid
Simplex 9 Element Coalescer Skid
Pall’s Asian Rental fleet consists of one skid type. Typical particle removal applications include:
- Feed stocks to protect catalytic reactor beds
- LPG, gasoline, diesel, and jet fuel final products
- Many other contaminated products that can be
found in a variety of storage tanks in a plant - Amine (rich and lean)
- Aromatic extraction solvents
- Dehydration solvents
- Sour water
- Make-up water
- Pre-filtration for liquid/liquid separations
Click the PDF below for detailed information regarding the Asian Rental Fleet skid.
Applications
-
Hazy ProductFinal refinery products are usually filtered and coalesced to remove solid contaminants and suspended water prior to leaving the refinery premises for final delivery. Contaminants, such as rust and pipe scale can foul and erode distribution equipment (e.g. pumps, nozzles, flow meters) as well as end users’ equipment (e.g. engines, boilers). Water in fuels can also cause corrosion leading to major problems within the engine injection system or the engine itself.Learn More About Hazy Product »
-
Hydroprocessing – Catalyst Bed or Exchanger FoulingHydrotreating is a catalytic chemical process to remove Sulfur (S), Nitrogen (N), Oxygen (O), and metals from straight run and cracked products. This “clean-up” also saturates olefins to yield easier-to-process intermediates. Removing the S reduces SOx emissions when fuels are combusted. Sulfur also poisons downstream reformer catalysts and must be removed from the feeds to improve catalyst bed activity and prevent costly shutdowns.Learn More About Hydroprocessing »
-
Acid Gas Removal – Amine FoamingAcid gas removal processes utilize amines or specialty solvents to remove acid gases such as H2S and/or CO2 from Refinery Fuel Gas (RFG) in order to meet the gas quality specifications. The sour gas is contacted with lean amine in the contactor tower. An acid-base reaction occurs, binding the acid gases to the amine with a weak bond. The rich amine then flows to a regenerator, where heat breaks the weak bond between the amine and the acid gas, releasing the acid gas and regenerating the amine for re-use. The acid gases exit the top of the regenerator for further treatment while the lean amine is recirculated back to the contactor in a recirculating loop. Acid gases must be properly treated to achieve oil production quotas and avoid operation bottlenecks.Learn More About Acid Gas Removal »
-
Caustic Carryover/High SodiumCaustic treating is used to upgrade a wide range of liquid fractions from LPG to diesel fuels and heating oils. As the caustic solution (and often a catalyst) mixes with the hydrocarbon feed it either extracts or sweetens mercaptans, depending on the process used. However, the combination of the hydrocarbon and mercaptan-rich caustic also forms a very stable emulsion that is difficult to separate, causing significant quantities of caustic carryover in the product. If the caustic emulsion is not separated from the hydrocarbon stream the results is off-spec product.Learn More About Caustic Carryover »