Prevent Foaming, Fouling, and Deposition in Gas Processing Units and LNG Applications
Prevent Foaming, Fouling, and Deposition in Gas Processing Units and LNG Applications
Do you suffer from foaming in your amine contactor? Are you concerned about fouling in your compressors? Do you suspect solids and salts deposition in your Heat Exchangers, Driers, or Cold Box?
Join this webinar to find out how you can tackle these problems.
Gain insights about contamination with an introduction to filtration and separation applications in Gas Processing and LNG industries, illustrated with real-life case studies.
Speaker
Mustafa Daoud
Scientific & Laboratory Services Leader
Pall Corporation
Mustafa Daoud received his Master degree in Chemical Engineering from Engineering University in Brussels, Belgium.
He joined Pall Middle East since 2004 focusing on scientific and technical support for filtration and separation solutions. He acquired large experience by engaging and collaborating with technical divisions of major Power, oil & gas and Petrochemical companies.
He is responsible for technical audits specifically for contamination mapping, piloting, and filtration separation solutions upscaling. He has contributed establishing novice solutions such as transmissions pipelines protection and hydrocarbon condensates dewatering supporting directly customers with processes enhancement initiatives."
Access the full webinar by completing the form below
Oil & Gas Filtration And Separation Solutions | Pall Corporation webinar series
This webinar and panel discussion will provide information on the types and applications of contaminant separation equipment in amine systems used to remove CO2 from natural gas and on CO2 underground injection.