Ultipleat® High Flow Filter Systems
Don’t compromise on service life and operating costs. Let Pall’s unique technology give you the durability and affordability you require.
Long filter service life, low operating costs, compact design.
The Ultipleat High Flow filter satisfies the need for an economical and reliable filter system for high flow applications. Used in a wide variety of applications where high flow rates and long service life are primary requirements, Ultipleat High Flow filter systems have been successfully used worldwide in installations with flow rates up to 115,442lpm (30,500 gpm).
With an innovative crescent-shaped pleat design, the Ultipleat high flow filter area is packed into a single cartridge while fully utilizing the media for solids collection. Ultipleat High Flow filters provide exceptional filter service life when dealing with low fluxes and higher levels of incoming contaminants, reducing the number of filter changeouts and lowering the cost of replacement cartridges and disposal of spent filters.
Benefits
-
Lower capital and installation costs
- At between two and four times smaller than conventional depth or pleated filter technologies, Ulitpleat High Flow is less costly to install and maintain.
-
High-Performance Filtration Efficiency
- The absolute rated filter medium with up to 99.98% efficiency allows reproducible performance.
-
Process reliability
- Unique pleat design maintains superior solid contamination removal and process efficiency compared to conventional elements with triangular-shaped pleats
-
Reduced installation footprint
- Three configurations are available - horizontal, vertical and centerpipe design to suit limited floor space.
-
Lower operating and waste disposal costs
- Maintenance and production downtime are dramatically reduced with 30 times fewer filters to change out than conventional depth filters. Removal of spent elements is easy and mess-free as solid contamination is trapped inside the filter.
-
Longer service life
- Up to four times less volume of spent filters compared to conventional depth filters.
Ultipleat High Flow can be used in the following:
Refinery, Oil and Gas
- Upstream Condensate
- Produced and injection water
- Feedstock applications
- Coalescer protection
Chemical and Polymer
- Carbon fiber production
- Coalescer protection for amin applications
Power & Utilities
- Pall Ultipleat High Flow technology helps reduce boiler tube failures
- Reduces start-up time and increases boiler reliability
Industrial Manufacturing
- Acts as a barrier to cysts and oocysts
- Prefilter for bottled water sterilizing filters
Microelectronics
- Pre reverse osmosis filtration
- Cooling water
- Pre-RO
- Resin trap filtration
- Wet etching and cleaning
Food and Beverage
- Highly efficient particle filtration in high flow rate food and beverage applications
-
Profile Polypropylene
-
Glass Fiber
| Product ID | Product Name | Shop Now |
|---|---|---|
| HFU640UY020J | Ultipleat® High Flow, Filter Grade 2μm, Length 40 inches | View Product > |
| HFU660UY045J | Ultipleat® High Flow, Filter Grade 4.5μm, Length 60 inches | View Product > |
| HFU640UY045J | Ultipleat® High Flow, Filter Grade 4.5μm, Length 40 inches | View Product > |
| HFU640UY045H13 | Ultipleat® High Flow, Filter Grade 4.5μm, Length 40 inches | View Product > |
| HFU620UY045J | Ultipleat® High Flow, Filter Grade 4.5μm, Length 20 inches | View Product > |
| HFU660UY060J | Ultipleat® High Flow, Filter Grade 6μm, Length 60 inches | View Product > |
| HFU640UY100J | Ultipleat® High Flow, Filter Grade 10μm, Length 40 inches | View Product > |
| HFU620UY100J | Ultipleat® High Flow, Filter Grade 10μm, Length 20 inches | View Product > |
| HFU660UY100J | Ultipleat® High Flow, Filter Grade 10μm, Length 60 inches | View Product > |
| HFU640UY100H13 | Ultipleat® High Flow, Filter Grade 10μm, Length 40 inches | View Product > |
| HFU640UY200J | Ultipleat® High Flow, Filter Grade 20μm, Length 40 inches | View Product > |
| HFU640UY400J | Ultipleat® High Flow, Filter Grade 40μm, Length 40 inches | View Product > |
| HFU640UY1000J | Ultipleat® High Flow, Filter Grade 90μm, Length 40 inches | View Product > |
| Product ID | Product Name | Shop Now |
|---|---|---|
| HFU640GF100H13 | Ultipleat® High Flow, Filter Grade 10μm, Length 40 inches | View Product > |
| HFU660GF100H13 | Ultipleat® High Flow, Filter Grade 10μm, Length 60 inches | View Product > |
| HFU660GF100H | Ultipleat® High Flow, Filter Grade 10μm, Length 60 inches | View Product > |
| HFU660GF200H | Ultipleat® High Flow, Filter Grade 20μm, Length 60 inches | View Product > |
| HFU660GF200H13 | Ultipleat® High Flow, Filter Grade 20μm, Length 60 inches | View Product > |
Case Study: Pall's Ultipleat® High Flow Filter Improves the Protection of Gas Turbines on Platforms and FPSOs
Diesel produced in West Africa often contains contaminants such as heavy metals, additives, gums, and bacteria, which can cause engine problems. Aero derivative engines require finer protection compared to heavy-duty gas turbines or diesel engines.
This case study will show how Pall's Ultipleat High Flow Filters assisted an offshore oil company and a Floating Production, Storage, and Offloading (FPSO) in providing absolute-rated filtration efficiency. This ensured that the turbine and last-chance filters were protected.
Maximize service life and reduce operating costs with Ultipleat High Flow. Speak to one of our filtration experts to learn more.