注目情報

Microfiltration System

Pall Aria™ Microfiltration System Consistently Clarifies River Water with High Turbidity Peaks

Product: Pall Aria AP system

 

With the increasing complexity of dairy equipment and operations, there is a growing trend towards more reliable and higher quality water treatment processes. In addition, as utilization of our water resources becomes more intensive, meeting demand may require using water from more challenging sources. In many cases, the water supply comes from a surface water source, often a river which may experience high turbidity peaks during rainfall events.

 

In the past, conventional clarification and media filtration have been used in many of these situations. However as these systems age and regulations tighten, these plants can have difficulty coping with peak turbidity loads. In some cases additional water treatment chemicals are required to maintain supply during a turbidity event; in other cases operation of the treatment plant is suspended until the event passes, an approach which can require considerable storage volumes of treated water.

 

The Challenge

A leading dairy producer operating one of the world’s largest ingredient plants sourced process water from two rivers nearby, which was then treated with conventional clarification/filtration systems. To support the production of more than 60 tons of products per hour, including powders, dry salt cheese, cream and mozzarella, a consistent and regular supply of high quality water is critical.

 

On general day to day river water turbidity, the existing water treatment plant meets the site water quality and capacity requirements. However during high turbidity events the site water treatment plant encountered problems in handling the higher solids loading and the site’s water treatment capacity and quality decreases. Often the high turbidity events experienced at the site last for a few days. However the treated water storage capacity at the site is only a few hours. In extreme cases the high turbidity events can cause severe disruption and downtime for the production site due to the shortage of treated water.

 

The producer needed to review filtration requirements in order to constantly produce high quality water, regardless of the turbidity variations and spikes characterize their feed water.

 

 

The Solution:

Pall Aria Microfiltration System Pall Aria membrane systems are designed to meet the stringent requirements of dairy and other industries, producing high quality water irrespective from raw feed water variance. The Pall Aria modules use proprietary polyvinylidene fluoride (PVDF) hollow fiber membrane technology with advanced bonding techniques for an exceptionally strong module design. 

 

The membranes have a nominal pore size of 0.1 μm and can remove suspended solids, bacteria, cysts and oocysts, organics and other contaminants from surface and ground water sources.

 

The highly porous PVDF membrane is the heart of the system, which means a system can be designed at higher sustainable fluxes compared to other membranes, or it can be operated with lower fouling resistance, lower pumping head pressure, or increased intervals between regeneration sequences — all of which have substantial operational benefits including operational flexibility when confronted with turbidity events.

 

To ensure maximum efficiency and lowest total cost of ownership, Pall has developed techniques to keep the membranes free of fouling materials. These are integrated as specific operating modes within the automation software.

 

• In normal conditions, water is filtered in direct mode outside-in through the hollow fiber. Depending on water quality, a small amount of the fluid may be recirculated, resulting in lower accumulation of foulants and debris on the membrane surface.

 

• Backwash, or simultaneous air scrubbing and reverse flow (SASRF) at regular intervals (every 15-120 minutes), results in sustained flux over a longer filtration time. Air is injected at low pressure into the feed side of the module as a mechanical process to remove debris and decrease the rate of overall trans-membrane pressure (TMP) increase. At the same time, filtrate that has been collected in the dedicated reverse flow tank is pumped in the reverse direction into the module. After a 30 second SASRF cycle, most if not all of the accumulated debris has been swept away to drain. A forward flush circulating feed water or filtrate at high velocity across the external surface of the membrane fibers completes the SASRF cycle.


• Enhanced flux maintenance (EFM) is another automated cycle that uses warm water with mild chemical solutions tailored to specific foulants that may be present. The time interval between EFM is user-defined and depends on the running conditions of the membrane. EFM is used to reduce the frequency at which a partially fouled membrane results in the system operating at less than peak efficiency. By allowing the membranes to operate at high flux rates, EFM enables a smaller system footprint resulting in floor space and facility cost savings, as well as a lower average TMP, generating pumping energy savings. The durable, strong and chemically resistant PVDF hollow fibers make this possible. They can be subjected to thousands of EFM cycles with no reduction in service life.

 

• While SASRF and EFM are designed to remove particulate matter and routine foulants, it may be occasionally necessary to perform a complete CIP process (typically monthly). This 2-step protocol using an acidic solution and a caustic solution with chlorine returns the modules to “nearly new” condition and can be performed hundreds of times over the life of the modules. Due to the low frequency of CIP operation, the process is semi-automated.

Pilot testing was performed at the dairy site over a period of 8 months to confirm the preliminary design parameters of the microfiltration (MF) system, including operating flux and flux maintenance processes. Pre-treatment with 2.5-5 ppm of polyaluminium chloride, selected from among flocculation chemicals used in the existing water treatment plant, directly injected into the pilot MF feed tank, was shown to be beneficial both during normal water conditions and high turbidity events.

 

SASRF cycles, every 15 to 20 minutes, and a daily EFM with 500 ppm of sodium hypochlorite proved to be highly efficient in maintaining the TMP below 1.5 bar during the turbidity events, with a flux of 65 lmh. The Pall MF pilot system was able to continue operating with feed water turbidity as high as 450 NTU. There was no need to shut down the MF system due to any high feed water turbidity events that were experienced during the trial period. At all times during the trial the MF filtrate turbidity remained below 0.1 NTU.

 

The Pall Aria microfiltration system demonstrated it could provide an uninterrupted supply of high quality water to the dairy site, from both river sources, during normal and high-turbidity events.

TFF Technology Increases Yield and Reduces Waste Streams

Up to 80% of the extract contained in the surplus yeast that collects at the bottom of tanks after fermentation and maturation can now be recovered rather than disposed of. Beer can be recovered and blended back into the brewing process at a ratio of up to 5% without negatively influencing the beer quality, increasing the yield and reducing the total beer volume needing to be produced. This represents a lower CO2 footprint, reduced water usage, and a lowering of production costs, plus the minimized waste stream reduces disposal costs and ensures a lower level of BOD’s and COD’s are returned back into the environment.
Up to 80% of the extract contained in the surplus yeast that collects at the bottom of tanks after fermentation and maturation can now be recovered rather than disposed of. Beer can be recovered and blended back into the brewing process at a ratio of up to 5% without negatively influencing the beer quality, increasing the yield and reducing the total beer volume needing to be produced. This represents a lower CO2 footprint, reduced water usage, and a lowering of production costs, plus the minimized waste stream reduces disposal costs and ensures a lower level of BOD’s and COD’s are returned back into the environment.
詳細を見る

Craft Brewery Preserves Image and Limits Losses

Although beer is restrictive to bacterial growth due to its low pH, ethanol concentration, and low oxygen content, the presence of certain beer spoilage bacteria including Lactobacillus, Pediococcus, Pectinatus, and Megasphaera can generate off-flavors, turbidity and acidity. Such quality deficiencies render the product unacceptable and often result in high economic losses and negative brand image. Throughout the production process, undesirable microbial contamination must be prevented to achieve the required final beer quality. Such contamination may originate from ingredients (including yeast), air and water utilities coming into contact with the product, and the environment.
Although beer is restrictive to bacterial growth due to its low pH, ethanol concentration, and low oxygen content, the presence of certain beer spoilage bacteria including Lactobacillus, Pediococcus, Pectinatus, and Megasphaera can generate off-flavors, turbidity and acidity. Such quality deficiencies render the product unacceptable and often result in high economic losses and negative brand image. Throughout the production process, undesirable microbial contamination must be prevented to achieve the required final beer quality. Such contamination may originate from ingredients (including yeast), air and water utilities coming into contact with the product, and the environment.
詳細を見る

Pall Aria™ System Rescues Bottled Spring Water Producer from Plant Closure

Spring water is a valuable natural resource, which requires good purification treatment before appearing on grocery store shelves as high purity, visually pleasing bottled product. Filtration is a key process step required to achieve consistently high product quality. The costs associated with filtration may be substantial, depending on source water quality. Disposable filters are a technically sound solution but their use may become economically unsustainable in the face of difficult or variable quality source water.
Spring water is a valuable natural resource, which requires good purification treatment before appearing on grocery store shelves as high purity, visually pleasing bottled product. Filtration is a key process step required to achieve consistently high product quality. The costs associated with filtration may be substantial, depending on source water quality. Disposable filters are a technically sound solution but their use may become economically unsustainable in the face of difficult or variable quality source water.
詳細を見る

Microflow System Offers 10 Months Payback in Cheese Brine Purification

Salting by immersion in brine is used for many varieties of cheese worldwide. During repeated immersions fat, curd particles and microorganisms from the cheese plus the accumulation of proteins and other components builds up a nutrient-rich environment for the salt resistant microorganisms. Reused brine may then become a reservoir of unwanted microorganisms, such as gas- or pigmentproducing bacteria, yeast and mold, or salt resistant pathogens, cross-contaminating the cheese and impacting their quality. Good control of the brine and the brining operation is essential to ensure consistent daily production. Additionally, brine disposal is coming under increasing focus. High disposal costs or volume limitations in specific areas are driving the demand for greater brine reuse, to generate operating cost savings and minimize the plant environmental footprint.
Salting by immersion in brine is used for many varieties of cheese worldwide. During repeated immersions fat, curd particles and microorganisms from the cheese plus the accumulation of proteins and other components builds up a nutrient-rich environment for the salt resistant microorganisms. Reused brine may then become a reservoir of unwanted microorganisms, such as gas- or pigmentproducing bacteria, yeast and mold, or salt resistant pathogens, cross-contaminating the cheese and impacting their quality. Good control of the brine and the brining operation is essential to ensure consistent daily production. Additionally, brine disposal is coming under increasing focus. High disposal costs or volume limitations in specific areas are driving the demand for greater brine reuse, to generate operating cost savings and minimize the plant environmental footprint.
詳細を見る

Distillers Improve Quality While Reducing Operating Costs with SUPRApak™ Technology

Filtration of spirits can be a challenging task. It is essential to remove contaminants that may cause turbidity while retaining the quality enhancing components in the product. Filter sheets are the traditional method for achieving this delicate balance. Sheets are comprised of a unique matrix of materials that provide an excellent combination of adsorption and depth filtration, making them an ideal solution for turbidity reduction and haze removal in spirits. Filter sheets are available in multiple grades to cover a wide range of applications from filtration of cordials to chill haze reduction in brown spirits to particle removal in white spirits. Additionally many plate and frame filter units have the flexibility to add or remove sheets to suit the batch size, flow rate or the specific product to be filtered.
Filtration of spirits can be a challenging task. It is essential to remove contaminants that may cause turbidity while retaining the quality enhancing components in the product. Filter sheets are the traditional method for achieving this delicate balance. Sheets are comprised of a unique matrix of materials that provide an excellent combination of adsorption and depth filtration, making them an ideal solution for turbidity reduction and haze removal in spirits. Filter sheets are available in multiple grades to cover a wide range of applications from filtration of cordials to chill haze reduction in brown spirits to particle removal in white spirits. Additionally many plate and frame filter units have the flexibility to add or remove sheets to suit the batch size, flow rate or the specific product to be filtered.
詳細を見る

Fermentation Broth Clarification Systems for Food and Feed Ingredients Manufacturing

Producers of bulk food and feed ingredients such as amino acids, organic acids, and vitamins use fermentation as the basis of their production. Today’s modern industrial biotechnology processes use carefully selected and purified microbial cell cultures to produce an ever-increasing variety of ingredients and increase productivity. During fermentation, the microorganisms multiply in industrial bioreactors, utilizing a carbohydrate source for energy. The course of microbial growth progresses under well-controlled conditions of aeration, agitation rate, temperature, pH and other parameters. Fermentation can last from a few hours to several days. The metabolic end products produced by the microorganisms are the basis for many ingredients used today.
Producers of bulk food and feed ingredients such as amino acids, organic acids, and vitamins use fermentation as the basis of their production. Today’s modern industrial biotechnology processes use carefully selected and purified microbial cell cultures to produce an ever-increasing variety of ingredients and increase productivity. During fermentation, the microorganisms multiply in industrial bioreactors, utilizing a carbohydrate source for energy. The course of microbial growth progresses under well-controlled conditions of aeration, agitation rate, temperature, pH and other parameters. Fermentation can last from a few hours to several days. The metabolic end products produced by the microorganisms are the basis for many ingredients used today.
詳細を見る

Cider Producer Maximizes Yield and Increases Capacity with the Oenoflow™ HS System

Filtration is a key operation in modern cider production to deliver visually bright and shelf stable product. Traditionally, cider clarification has been performed with diatomaceous earth or sheet based filtration technologies. However, with more favorable economics, easier operation and lower waste volumes, crossflow filtration systems like Pall’s Oenoflow XL system have become more widely adopted over the past decade.
Filtration is a key operation in modern cider production to deliver visually bright and shelf stable product. Traditionally, cider clarification has been performed with diatomaceous earth or sheet based filtration technologies. However, with more favorable economics, easier operation and lower waste volumes, crossflow filtration systems like Pall’s Oenoflow XL system have become more widely adopted over the past decade.
詳細を見る

TAB Filtration Significantly Improves Ready to Drink Tea Quality and Yield

Ready to drink tea, fruit juices and drinks, carbonated soft drinks, and other beverages are subject to spoilage due to the presence of heatresistant, acidophilic bacterial spores (TAB). The thermoacidophilic spores may originate either from exposure to agricultural raw materials such as in fruit juice production, or from contamination in the beverage ingredients, such as sweeteners, juice and tea concentrates, or flavors, essences, and colors from natural extracts.
Ready to drink tea, fruit juices and drinks, carbonated soft drinks, and other beverages are subject to spoilage due to the presence of heatresistant, acidophilic bacterial spores (TAB). The thermoacidophilic spores may originate either from exposure to agricultural raw materials such as in fruit juice production, or from contamination in the beverage ingredients, such as sweeteners, juice and tea concentrates, or flavors, essences, and colors from natural extracts.
詳細を見る

Cross-flow Lees Filter Experience Delivers Efficiency and Economy at Yalumba

Recovery of wine from lees represents one of the most challenging forms of filtration faced by wineries. The high concentration and variability of the suspended solids limit the suitable filtration technologies, while strict environmental regulations and sustainability programs are increasing pressure to reduce waste volumes. Traditionally, lees filtration is performed with filter aid based systems like rotary vacuum drum (RVD) or chamber press filters. While these systems typically have good volumetric recovery of the wine from the solids, there are some inherent drawbacks that can affect wine quality. The open design allows for oxygen pick-up and the recovered wine often needs further processing. The wine is typically downgraded in value and used in blends instead of added back to the original batch.
Recovery of wine from lees represents one of the most challenging forms of filtration faced by wineries. The high concentration and variability of the suspended solids limit the suitable filtration technologies, while strict environmental regulations and sustainability programs are increasing pressure to reduce waste volumes. Traditionally, lees filtration is performed with filter aid based systems like rotary vacuum drum (RVD) or chamber press filters. While these systems typically have good volumetric recovery of the wine from the solids, there are some inherent drawbacks that can affect wine quality. The open design allows for oxygen pick-up and the recovered wine often needs further processing. The wine is typically downgraded in value and used in blends instead of added back to the original batch.
詳細を見る